How to use a band saw safely?
Band saw is
one of the most power tools that can cut material to a desired length or a
contour, even long, straight and curved lines. However, without well-trained
skills, the band saw can be a challenge for workers. It can cause danger for
workers if they don’t use it in the right way. Applying following simple tips
can help you use a band saw safely and effectively.
Tip 1: Set up your band saw
Read all the manufacturer’s instruction that
accompany the unit very carefully to assemble a band saw. There are
numerous fine adjustments which are necessary for the band saw to cut properly.
Preparing everything carefully is always improtant, so don’t ignore this
process. Turning-up a band saw is a process that involves:
- Changing the blade properly
- Entering
the blade on the crown of the wheels
- Setting
the guides and thrust bearings
- Tensioning
the blade
- Squaring
the table.
Tip 2: Follow every safety
information prior. For example :
-
Wear
safety glasses: Whenever you work with any woodworking tools, you should
remember to wear safety glasses. Band saw blades rotate at considerable speeg,
and small pieces of stock can be propelled in nearly any diriction so you
should make sure that nothing can shoot at your eyes.
-
Wear
hearing protection: When using a band saw for woodworking, it is doubtful that
the noise level would require hearing protection, but if you feel more
comfortable wearing ear plugs or ear muffs when using your band saw, by all
means do so.
-
Wear appropriate clothes: it is necessary to
wear protective clothes to avoid any accidents when working with your band saw
Tips 3: Measurements
Mark
youe measurements on the object you need to cut. Make sure that the sizes that
you are trying to cut are able to fit through the machine. This is more
important for any contour sawing as opposed to straight line cutting.
Tip 4: Adjust your blade guides
Once th blade is tensioned and tracking properly, there’s still some
tuning you can do that can make a real difference in performance. Beside, your
band saw utlizes a substantial numer of blocks and wheels to keep the blade in
its proper position throughout the cut. These blocks and wheels should be
regularly checked for wear and adjusted a per your manufacture’s recommendations.
Tip 5: Keep your hans away:
At no time during any of your cuts shoul
your hands be any closer than about three inches from the blade. One
hand shold be on each side of the stock, easing it through the blade. If you
are feeding the object make sure you keep your hands out of the way of the
blade and if you are using the powered feeder, make sure you are not in a
position to get caught in any moving part of the machine
Source:best bandsaw and top 5 best 14 bandsaw
