How to use a band saw safely?

How to use a band saw safely?

Band saw is one of the most power tools that can cut material to a desired length or a contour, even long, straight and curved lines. However, without well-trained skills, the band saw can be a challenge for workers. It can cause danger for workers if they don’t use it in the right way. Applying following simple tips can help you use a band saw safely and effectively.

Tip 1: Set up your band saw

 Read all the manufacturer’s instruction that accompany the unit very carefully to assemble a band saw. There are numerous fine adjustments which are necessary for the band saw to cut properly. Preparing everything carefully is always improtant, so don’t ignore this process. Turning-up a band saw is a process that involves:

 - Changing the blade properly

- Entering the blade on the crown of the wheels

- Setting the guides and thrust bearings

- Tensioning the blade

- Squaring the table.

Tip 2: Follow every safety information prior. For example :

-          Wear safety glasses: Whenever you work with any woodworking tools, you should remember to wear safety glasses. Band saw blades rotate at considerable speeg, and small pieces of stock can be propelled in nearly any diriction so you should make sure that nothing can shoot at your eyes.

-          Wear hearing protection: When using a band saw for woodworking, it is doubtful that the noise level would require hearing protection, but if you feel more comfortable wearing ear plugs or ear muffs when using your band saw, by all means do so.

-           Wear appropriate clothes: it is necessary to wear protective clothes to avoid any accidents when working with your band saw

      Tips 3: Measurements

Mark youe measurements on the object you need to cut. Make sure that the sizes that you are trying to cut are able to fit through the machine. This is more important for any contour sawing as opposed to straight line cutting.

Tip 4: Adjust your blade guides

Once th blade is tensioned and tracking properly, there’s still some tuning you can do that can make a real difference in performance. Beside, your band saw utlizes a substantial numer of blocks and wheels to keep the blade in its proper position throughout the cut. These blocks and wheels should be regularly checked for wear and adjusted a per your manufacture’s recommendations.

Tip 5: Keep your hans away:

At no time during any of your cuts shoul  your hands be any closer than about three inches from the blade. One hand shold be on each side of the stock, easing it through the blade. If you are feeding the object make sure you keep your hands out of the way of the blade and if you are using the powered feeder, make sure you are not in a position to get caught in any moving part of the machine

Source:best bandsaw and top 5 best 14 bandsaw